Curbless Shower Pan with Linear Drain (Part 3) – Shower Pan Installation


Learn how to install a curbless shower pan with linear drain in this Part 3 video. We show how to prep the linear drain channel body, add the Schluter shower pan and extend the shower pan with dry pack.

Learn to simply the craft of building custom bathrooms and showers


0:04 The first step was to assemble Schluter’s KERDI-LINE Channel Body
0:10 It comes with a rubber Fernco that attaches to a riser pipe
0:50 The riser pipe can either be glued into the P-Trap via a coupling
1:25 or attached to the Fernco and then glued to the P-Trap.

5:55 Schluter ALL-SET was mixed with 8.5 quarts of water to produce a thinner consistency.
8:25 This was burned into the recessed shower floor after dampening the wood with a sponge.
8:47 More thin-set was directionally troweled into the wood using a 1/4″ x 3/8″ square notch trowel.

9:34 The Schluter Channel Support was bonded to the recessed subfloor
10:10 Then the Schluter curbless shower pan was set next.
10:40 We extended the tray square footage by using Mapei’s 4-to-1 mud bed mix.

Watch our full video to see Part 3 of how to build a curbless shower pan with linear drain

#curblessshower #linearshowerdrain #HomeRepairTutor